DSCF0026.JPG
3634 hits | 92.54 KB | Posted: 4/25/04
The hood has been removed. Getting ready to pull the motor.

DSCF0027.JPG
837 hits | 80.01 KB | Posted: 4/25/04
Setting the hood aside for now.

DSCF0028.JPG
599 hits | 65.48 KB | Posted: 4/25/04
Cracked rubber seal.

DSCF0030.JPG
613 hits | 60.98 KB | Posted: 4/25/04
Rusted battery tray and jerry-rigged battery mount.

DSCF0031.JPG
541 hits | 62.6 KB | Posted: 4/25/04
Alternator removed

DSCF0032.JPG
458 hits | 58.69 KB | Posted: 4/25/04
Power steering pump removed

DSCF0033.JPG
496 hits | 64.24 KB | Posted: 4/25/04

DSCF0034.JPG
448 hits | 75.5 KB | Posted: 4/25/04

DSCF0035.JPG
420 hits | 63.32 KB | Posted: 4/25/04
Removing the radiator

DSCF0036.JPG
485 hits | 62.12 KB | Posted: 4/25/04
Radiator removed -- looks like it'll need to be plugged or replaced (notice the corroded fins in gre...

DSCF0037.JPG
438 hits | 68.5 KB | Posted: 4/25/04
Radiator removed

DSCF0038.JPG
446 hits | 63.69 KB | Posted: 4/25/04
Removing valve covers

DSCF0039.JPG
406 hits | 74.74 KB | Posted: 4/25/04

DSCF0040.JPG
378 hits | 63.94 KB | Posted: 4/25/04

DSCF0045.JPG
478 hits | 58.55 KB | Posted: 4/25/04
Removing driveshaft

DSCF0046.JPG
441 hits | 48.31 KB | Posted: 4/25/04
Removing bolts from engine mounts

DSCF0052.JPG
388 hits | 69.37 KB | Posted: 4/25/04

DSCF0059.JPG
508 hits | 46.18 KB | Posted: 4/25/04
Removing bolts from the flanges on the headers

DSCF0060.JPG
663 hits | 87.28 KB | Posted: 4/25/04
Pulling the motor and trans out

DSCF0061.JPG
586 hits | 82.47 KB | Posted: 4/25/04
Another shot of the engine/trans coming out

DSCF0062.JPG
454 hits | 76.74 KB | Posted: 4/25/04
Cruise-o-matic removed

DSCF0063.JPG
399 hits | 64.48 KB | Posted: 4/25/04
heads removed

DSCF0064.JPG
466 hits | 75.95 KB | Posted: 4/25/04
Heads removed

DSCF0065.JPG
585 hits | 75.42 KB | Posted: 4/25/04
Block after removal of heads. Notice buildup of burned oil and the remainder of the head gasket.

DSCF0066.JPG
442 hits | 69.48 KB | Posted: 4/25/04

DSCF0067.JPG
417 hits | 71.14 KB | Posted: 4/25/04
Another angle of the block

DSCF0068.JPG
422 hits | 77.71 KB | Posted: 4/25/04
Another head removed

DSCF0071.JPG
405 hits | 74.95 KB | Posted: 4/25/04
Upside down on the engine stand.

DSCF0072.JPG
433 hits | 66.67 KB | Posted: 4/25/04

DSCF0073.JPG
477 hits | 68.01 KB | Posted: 4/25/04
Getting ready to install windage tray, new gaskets, and new oil pump.

DSCF0075.JPG
475 hits | 59.46 KB | Posted: 4/25/04
Cleaning off the old oil pan gasket

DSCF0075.JPG
410 hits | 59.46 KB | Posted: 4/25/04

DSCF0076.JPG
562 hits | 64.35 KB | Posted: 4/25/04
Fully assembled -- notice the gold windage tray between the block and the oil pan.

DSCF0078.JPG
694 hits | 68.44 KB | Posted: 4/25/04
Cleaned up the block and pistons with a wire brush to get rid of the oil and gunk buildup

DSCF0079.JPG
430 hits | 72.8 KB | Posted: 4/25/04
Dirty

DSCF0080.JPG
412 hits | 72.69 KB | Posted: 4/25/04
352 stamping (it is a 390 block)

DSCF0082.JPG
459 hits | 79 KB | Posted: 4/25/04
C6ME-A casting on the 390 block

DSCF0083.JPG
436 hits | 65.1 KB | Posted: 4/25/04
Clean

DSCF0084.JPG
418 hits | 82.46 KB | Posted: 4/25/04
On the engine stand

DSCF0085.JPG
494 hits | 71.9 KB | Posted: 4/25/04
Engine compartment is empty.

DSCF0086.JPG
447 hits | 85.63 KB | Posted: 4/25/04
Loading the parts into the truck for the ride back home.

DSCF0099.JPG
641 hits | 87.05 KB | Posted: 4/25/04
Winching her onto the trailer for the ride home.

DSCF0100.JPG
886 hits | 107.65 KB | Posted: 4/25/04
All set! Ready to sit for a month or two in the garage without a motor and trans.